Ciao Ivo,
Questo è il contenuto del tuo file relativo al metariale M6X:
; Core data for M6x
[GENERAL]
; Max allowed induction (in Tesla)
MaxB=1.4
[PERM]
; B=MU
;0=2000
0=300
0.05=8000
0.2=20000
0.8=26000
1.5=4000
1.8=1900
2=500
2.2=1
;S = "2000,0,8000,.05,20000,.2,26000,.8,4000,1.5,1900,1.8,500,2" 'From Sample1
Nel programma preumo che tù usi i dati sopra e non quelli dopo la variabile S?
Grazie e ciao
Tiziano
File dati M6 di OPT
-
- R.I.P.
- Messaggi: 110
- Iscritto il: 15 ott 2005, 01:00
- Località: France
- Contatta:
- plovati
- sostenitore
- Messaggi: 7962
- Iscritto il: 05 ott 2005, 20:19
- Località: Italy
- Has thanked: 3 times
- Been thanked: 38 times
Ma quindi siamo ad un mu di 26.000/1.26 a 0.8T ??
edcore per il suo lamierino dà questi dati:
http://www.audiotransformers.net/tech_notes/tn41.htm
_________
Piergiorgio
edcore per il suo lamierino dà questi dati:
http://www.audiotransformers.net/tech_notes/tn41.htm
_________
Piergiorgio
_________
Piergiorgio
Piergiorgio
-
- R.I.P.
- Messaggi: 110
- Iscritto il: 15 ott 2005, 01:00
- Località: France
- Contatta:
Hi Piergiorgio,
Since I was unable to obtain coherent data about permeability, the table I used is the result of measured test bobins on various iron size, but all were M6X and from the same manufacturer.
The method was to feed the bobin with a variac and plotting current versus voltage.
From there one obtain the primary inductance at various induction levels and finally the absolute permeability may be computed.
I've found more convenient to express µ vs induction.
Ivo.
Since I was unable to obtain coherent data about permeability, the table I used is the result of measured test bobins on various iron size, but all were M6X and from the same manufacturer.
The method was to feed the bobin with a variac and plotting current versus voltage.
From there one obtain the primary inductance at various induction levels and finally the absolute permeability may be computed.
I've found more convenient to express µ vs induction.
Ivo.
-
- advanced member
- Messaggi: 5037
- Iscritto il: 03 nov 2005, 05:47
- Località: Italy
- Been thanked: 1 time
- Contatta:
Ciao Ivo,
di seguito le misure fatte usando il tuo metodo di misura sul trasformatore universale, se vuoi fare qualche commento:
Schema di collegamento
Risultati:
Ciao Tiziano
di seguito le misure fatte usando il tuo metodo di misura sul trasformatore universale, se vuoi fare qualche commento:
Schema di collegamento
Risultati:
Ciao Tiziano
Tiziano
http://mrttg.net/blog
http://mrttg.net/blog
-
- Argomenti simili
- Risposte
- Visite
- Ultimo messaggio
-
- 0 Risposte
- 1301 Visite
-
Ultimo messaggio da docelektro
-
- 3 Risposte
- 905 Visite
-
Ultimo messaggio da nicomario
-
- 5 Risposte
- 1027 Visite
-
Ultimo messaggio da EF80
-
- 4 Risposte
- 573 Visite
-
Ultimo messaggio da mrttg
-
- 4 Risposte
- 479 Visite
-
Ultimo messaggio da gluca